Action Item: Restart The DAQ Panel – 8000 IPW
Technical Services - Technical Guide
Occasionally DAQ panels require a manual restart. This can be caused by an intentional or unintentional drop in voltage of electrical power to the DAQ panel and the DAQ panel did not shut down and restart properly.
HOW TO MANUALLY RESTART THE DAQ PANEL
1. Disconnect the power cable from the bottom of the DAQ panel.
2. Wait at least 30 seconds.
3. Connect power cable back into bottom of DAQ panel.
4. Ensure that DAQ panel has powered on correctly and that all LED indicator lights are on.
a. The green LED light indicates that the DAQ panel is receiving power.
b. The orange LED indicates the DAQ panels status and should flash every 0.5 seconds. If the orange LED light is flashing every 0.5 seconds, then the DAQ panel is collecting and transmitting data correctly.
5. If the DAQ panel does not power on correctly, the DAQ panel likely needs to be replaced. Contact Vytelle SENSE Technical Support for further troubleshooting assistance.
NOTES ABOUT THE DAQ PANEL
DAQ panel has a 20 mm 6 AMP glass tube fuse. If the fuse has been compromised there is likely an issue with a data cable or an RTU.
TECHNICAL SUPPORT
If you have any further questions please contact Vytelle SENSE Technical Support at support@vytelle.com or by calling toll-free from US & Canada: 1-866-689-3477 ext. 1 The team is available Monday to Friday 7:00am to 5:00pm MST (excluding Canadian Statutory Holidays). After hours, please leave a detailed voicemail, email, or trial note and a TSR will respond the next business days.
Optimized for print with Google Chrome browser.