Tagging Guidelines

Technical Services - Technical Guide

This document sets out the parameters, requirements and recommended placement for EID tags to use on your Vytelle SENSE™ System.

HDX RFID ICAR COMPLIANT EID TAG

General Description

The Vytelle SENSE™ System requires the use of a single use Half Duplex (HDX) RFID ICAR compliant EID tag.

Half Duplex Technology (HDX) is utilized with the High-Performance Ultra EID Tag. HDX is a design principle whereby the transponder initiates the return signal to the reader/scanner/interrogator only after the end of the interrogation signal has been received and only after the storage capacitor has been fully charged in the transponder. The return signal is then only sent once, since the transponder has emptied its storage capacitor after it has sent its entire data content. This proven High-Performance technology provides enhanced signal strength for maximum read distance.

 

SPECIFICATIONS

General Explanation

RFID Compatibility ISO 11784 Compliant

Duplex Mode HDX

Operating Frequency 134.2 KHz

Marking 15 Digit Laser Marked Number

Security Tamper Proof Design

Power Passive (inductively powered from transceiver reading equipment; Feed Intake trough, and GSB antenna)

 

RECOMMENDED TAG

Allflex HDX High Performance Ultra EID Tags (ultra white EID tag with Extended Small Male). Extended small male EID tags are used for placement in a deeper location in the ear.

APPLICATION GUIDE

Recommended EID Tag Placement for Cattle

Application site must be free of foreign debris prior to placement of tags on the animal.

1. The EID tag should be placed in the middle of the ear between the two cartilage ribs close to the head.

2. The female portion of the tag should be on the inside of the ear with EID tag application. Note that this is a thicker part of the ear. Application may be more difficult when applying a visual tag.

3. Inspect placement after tagging to ensure there is sufficient space between ear and EID tag.

 

EID TAG CHECKLIST

Consider This Checklist Before Tagging

• Are all animals tagged prior to starting the warm-up?

• Is the location of the tag correct?

• Are the animals tagged with new HDX tags?

 

TECHNICAL SUPPORT

If you have any further questions please contact Vytelle SENSE Technical Support at support@vytelle.com or by calling toll-free from US & Canada: 1-866-689-3477 ext. 1 The team is available Monday to Friday 7:00am to 5:00pm MST (excluding Canadian Statutory Holidays). After hours, please leave a detailed voicemail, email, or trial note and a TSR will respond the next business days.

Optimized for print with Google Chrome browser.

 

Translate »